Laurastar Descaling Solution, Soleplate Hook and Dosing Bottle Uses
By SewYeahQuilting | Published: 2026-10-31
Category: Tips & Care
Learn how to use Laurastar Descaling Solution, the Protective Soleplate Hook and the IGGI Dosing Bottle in the right order, with checkpoints to avoid common mistakes.
Quick answer
Use Laurastar Descaling Solution only for the descaling cycle your Laurastar manual specifies, hang or rest the protective soleplate with the Laurastar Protective Soleplate Hook so the hot plate never touches fabric or an ironing board, and measure water for the IGGI steamer with the Laurastar Dosing Bottle instead of guessing.
Why the order matters more than the products
Descaling, soleplate handling and water dosing are separate maintenance jobs, but they share one risk: doing them in the wrong order can leave residue, water or a hot plate where it should not be. Descale when the machine is cool and the manual calls for it, handle the soleplate only when you can see where it is going, and dose water before you switch the steamer on.
The accessories in this guide are Laurastar-specific. The catalog does not list compatibility beyond the model names supplied, so check your own manual before substituting a bottle, hook or solution from another brand.
The heat-resistant mat is not optional
A Laurastar heat resistant mat belongs in the same routine as the soleplate hook because both give a hot soleplate a safe landing place. If you rest a hot soleplate on fabric, a synthetic cover or a crowded ironing board, you risk scorching or melting the surface. Set the mat out before you start descaling or swapping soleplates, not after the iron is already hot.
Step-by-step Laurastar accessory routine
- Read your model's descaling instructions first: Find the descaling section in your Laurastar manual and confirm the ratio, cycle and rinse steps for your iron or steam generator. Common mistake: following a generic online ratio instead of your model's instructions. If the manual is missing, contact Laurastar support before opening the descaling solution.
- Set up a cool, clear workspace: Unplug the iron or switch off the steamer, let it cool, and lay out a heat resistant mat and a towel. Common mistake: descaling while the machine is still warm or surrounded by fabric. Clear the ironing board of quilts and fabric before you begin.
- Mix and run the descaling cycle: Combine Laurastar Descaling Solution with water exactly as your manual states, run the descaling cycle, then rinse as directed. Common mistake: skipping the rinse, which can leave solution in the tank. Run one extra clear-water rinse if your manual allows it and you still see residue.
- Handle the soleplate with the hook: If you remove or swap a protective soleplate, use the Laurastar Protective Soleplate Hook to lift and rest it on the heat resistant mat. Common mistake: setting a hot soleplate face-down on the ironing board cover. Never place a hot soleplate directly on fabric, even for a second.
- Dose water for the IGGI with the bottle: Fill the Laurastar Dosing Bottle to the mark your IGGI manual specifies, then pour it into the steamer. Common mistake: topping up from a jug or tap without measuring. Keep the dosing bottle stored with the steamer so it is always at hand.
- Test steam on scrap fabric: After descaling and refilling, run steam over a scrap of cotton or a spare pressing cloth before touching a quilt. Common mistake: testing on the project itself and finding a water spot or residue. If steam looks uneven or spits, stop and recheck the rinse step.
Product facts
- Laurastar Descaling Solution: Laurastar Descaling Solution is part of Laurastar's accessory range for care and maintenance routines. Keep it with your ironing supplies so descaling happens on schedule rather than after steam performance drops.
Laurastar Descaling Solution - Laurastar Dosing Bottle (For Models: IGGI Steamer): The Laurastar Dosing Bottle is listed for the IGGI Steamer model. Use it to measure water for that steamer instead of filling from the tap by eye.
Laurastar Dosing Bottle (For Models: IGGI Steamer) - Laurastar Protective Soleplate Hook: The Laurastar Protective Soleplate Hook is a dedicated accessory for handling a protective soleplate. It gives the soleplate a defined resting point, which reduces the chance of touching the hot plate or setting it on fabric.
