How to Replace the Laurastar Water Tank for Smart Models

By SewYeahQuilting | Published: 2026-10-24

Category: How-to Guides

Learn how to safely remove and install a new Laurastar water tank for Smart models. This step-by-step guide covers preparation, replacement, and testing.

Quick answer

Unplug your Laurastar Smart, remove the empty tank, and insert the new Laurastar Water Tank for Smart models. No tools required.

Why use an official Laurastar water tank?

The Laurastar Water Tank for Smart models is designed to fit perfectly and maintain the steam system's performance. Using a non-genuine tank may cause leaks or poor contact with the ironing system's sensors, leading to inconsistent steam output. The official tank also includes the correct anti-scale filter to protect your machine over time.

When to replace the water tank

If you notice water not feeding properly, the tank cracks, or the iron stops producing steam, it is time for a replacement. Also consider replacing the tank if the anti-scale filter is worn and cannot be cleaned effectively. The Laurastar Water Tank for Smart models is a direct swap that restores full functionality.

Step-by-step replacement guide

Prepare your ironing system: Turn off and unplug your Laurastar Smart ironing system. Allow it to cool completely before handling. Empty any remaining water from the current tank by pouring it out over a sink. Never attempt to replace the tank while the system is hot or plugged in.
Remove the old water tank: Locate the water tank on the base of your Laurastar Smart. Lift the tank straight up and away from the unit. If it feels stuck, check that the locking mechanism is released (usually a small tab or button). Do not force the tank; check for a release latch if it resists.
Insert the new water tank: Take your new Laurastar Water Tank for Smart models. Align the bottom of the tank with the base slot and press down firmly until you hear a click. The tank should sit flush with the base. Ensure the tank is fully seated; an incomplete connection can cause water supply issues.
Test the installation: Fill the new tank with fresh water up to the max line. Plug in your Laurastar Smart and turn it on. Allow the system to heat up and test the steam output. Check for any leaks around the tank connection. If steam output is weak or no water flows, re-seat the tank and check that the anti-scale filter is properly installed.

Product details

Laurastar Water Tank - Complete (For Models: Smart): This replacement water tank is designed specifically for Laurastar Smart models and includes a built-in anti-scale filter. Using the correct tank prevents leaks and ensures your ironing system receives a steady flow of filtered water, extending the life of your steam generator.
Laurastar Water Tank - Complete (For Models: Smart)